Specify Location:
Top
Bottom
Top & Bottom

Specify Location:
Top: Right - Center - Left
Bottom: Right - Center - Left
Side: Top - Center - Bottom

Square Pegs:

Square pegs measure 3/8" x 3/8". Pegs are the end grain of a matching or contrasting wood species. A single peg is centered on both stile and rail. The double peg in a corner is centered according to stile width only.

Round Pegs:

Round pegs measure 5/16" in diameter. Pegs are face grain of a matching or contrasting wood species with the grain pattern perpendicular to the stile. A single peg is centered on both stile and rail.

Appliance Slot Cut

• A Slot Cut is routed on all four edges of the door.
• Make sure the appliance can accomodate the full thickness of the door. Some appliances offer optional handles/spacers to allow for fingers with this type of application.
  

Appliance Slot Kit

• The kit will require a 2" reduction in the width or height of the door. Included with the kit is a 2-1/2" piece of plywood to be inserted behind one edge of the door. The three remaining sides will have the Slot Cut.
• Most dishwashers require this kiton the bottom edge of the top door.

Appliance Slot / Handle

A 3-1/2" wide stile is required on one side. A 14" tall relief will be centered in the height for fingers in the area of the handle. All 4 sides will receive the Slot Cut.

Corner Susan Doors

Three types are available: Miter, Butt and Pie. Both stiles on the Miter will be 3/4" wider in the corner with the miter cut. The Butt corner will have 1 wider stile. The Pie will have standard size stiles in the corner. Both the Butt and Pie will have square corner outside edge profiles in the corner.

Wainscot Panels

Wainscot panels are available in many styles. You can customize size stiles and rails.